1: Our design team has more than 20-years Japanese-owned enterprises metal stamping die experience.
2:Especially professional in deep drawing stamping parts .
3:Provide services from design, processing, assembly to commissioning.
4:Kanou is focus on Japan market about 17 years ,and familiar with the requirement and quality standard of medical device
5:Kanou provides you various kinds and small batches service
Customer provider the products drawing-assessment process –product process technology – quote-purchase order-design-customer confirm drawing-mold process-mold assembly –mold commissioning-sample confirm-shipping.
Stamping products’ material:
1,SPCC/SPCD/SPCE
2,SECC/SECD/SECE
3,Copper alloy /Aluminum alloy
4,SUS305/SUS304/SUS316L/SUS430/SUS301
5,SPH440
Mold block:DC53,SKD11;
Mold plate:S45C S50C;
Mold Parts:DC53,SKD11,SKH51,SKH61,ASP23 ASP60,FUJIlloy
1:increase the dimension precision of tool.
2:Improve the tool surface and products.
3:Tool wear resistance increase, reducing the wear of tool components with volume.
4:make the tool life longer, less maintenance, improve the efficiency of production.
5:it will be better for environment.
Cemented auto parts mold punch , precision injection mold punch , drawing die punch, as above have very hard characteristics, therefore,suitable for high abrasion resistance requirements of industry (cutting ・ forming, mould, etc.) with tools On the other hand, because have is better than steel and ceramic compression strength and thermal conductivity,also should be done in the plastic processing of raw materials?
Cemented carbide is W (tungsten steel) made from carbon compound WC powder, the combination of Fe as material,
in 1300 ~ 1500 ℃ high temperature sintering.
Hard alloy is very the hardness very high alloy.
Cemented carbide is a W, Mo, Cr, Ti, Zr and Hf, V, Nb, Ta, nine kinds of carbon and Fe (Fe, Co, Ni) on the combination of metal alloy,generally refers to the WC – Co alloy!
Kanou set up with more than 20 years experiences of Japanese-funded enterprises stamping mould design team, for your stable mass production. So we are all servers for:design、processing、assembly、commissioning！
Kanou is good at Medical Device Parts,Deep Drawing,Progressive Stamping Dies ,Medical Device Part Mold and so on.
Hard alloy is higher than the hardness of iron and stainless steel, second only to diamond
And, the proportion of W (W: 19.3) is very large, more than twice the iron or copper,
and Au (gold: 19.3) about the same weight
Cemented carbide is W (tungsten steel) made from carbon compound WC powder, the combination of Fe as material,
in 1300 ~ 1500 ℃ high temperature sintering
Hard alloy is very the hardness very high alloy.
Cemented carbide is a W, Mo, Cr, Ti, Zr and Hf, V, Nb, Ta, nine kinds of carbon and Fe (Fe, Co, Ni) on the combination of metal alloy,
generally refers to the WC – Co alloy